Tilt Switch Probe - Model SL20 |
When material rises to tilt the probe 15¡ãor more from
its vertical position, the internal steel ball rolls off
center and its normally closed contacts will open. As
material falls away from the probe body and the probe
becomes upright, the ball returns to its original centered
position, once again causing switch actuation with the
contact closed. The change in the internal switch status
is user accessible for signaling alarms or lights with
the aim of safety protection. |
|
| Features |
- The SL20-30 tilt switch probe can be either used
separately or incorporated with controller.
- The controller is equipped with a 0~10s adjustable
delay circuit, preventing the tilt switch from false
tripping due to a short duration tilt.
- Normal/alarm positions are set by jumper setting,
by selecting the vertical or inclined position as
its normal status.
- Robust and features anti-corrosion construction
Easy installation
- PCB-fitted controller
- All probes are equipped with mounting accessories.
|
| Applications |
- Plugged chute and chute transition detection
- Conveyor belt misalignment detection
- Tripper discharge detection
- No material detection of belt or vibrating feeder
|
| Technical
Specifications |
- Contact: Normally closed, non-mercury
switch, 250mA/24 VDC, non-inductive load or 2amp 110/240
VAC rated switch
0.8A at 240VAC/1.5A at 120VAC (optional)
- Rated Temp.: -40¡æ ~ £«200¡æ
- Enclosure: Cast Iron, nickel-chrome
alloy plated; also available in Stainless Steel
- Tilt angle: 15¡ã
|
| |
| |
|
|
Tilt SWitch Controller - Model SL50 |
Saimo tilt switch controller is offered in two versions:
SL28 for metal construction and SL29 for plastic construction.
Both are protected to IP65, with large indicating lights
located on the front panel.
A 0-10 second adjustable time delay circuit in the control
unit prevents momentary tilting of the switch from causing
a false or premature contact transfer.
A selectable jumper permits normal output condition for
either vertical or tilted position of probe.
Two normally-open and two normally-closed output contacts
are available for connection to external alarms and/or
controls. |
|
| Technical
Specifications |
- Power supply:110 or 220 VAC ¡À 10%£¬47
£ 62 Hz£¬10W
- Output:1 DPDT contact, rated at
5Amp/220VAC or 5 Amp/28VDC, non-inductive load
- Delay time:0-10 seconds adjustable
- Jumper:Allow to select vertical
or inclined position as the normal status
- Enclosure:ABS outdoor casing
|
| |
| |
| |
| |
| |
| |
|
