Contact About Saimo Support and Service Solutions Equipment home
6105 controller

SAIMO Weigh Feeder Controller

The Saimo model 6105 is the premium weigh feeder controller. This controller is based on 32-bit microprocessor electronics with a 320X240 LCD display.

FEATURES
  • Digital electronics
        Provides accurate and drift-free performance
  • Auto Zero
        Automatically initiates a new zero through one easy push button operation.
  • Auto Span
        Offers several span calibration modes, such as static weights, test chain, electronic calibration and
        material calibration.
  • Auto Zero Tracking
        Auto-zero function activates whenever the conveyor belt runs empty for a preset time.
  • Programmable Features
        Digital inputs and outputs can be programmed to fit individual requirements.
  • Filtering Selection
        Filtering time can be adjusted for specific applications.
  • Zero Dead Band
        Minor flowrate variations can be reduced by setting a zero dead band.
  • Speed Input Selection
        Two kinds of speed input methods are available: internal (simulated) and external
  • Password Protection
        Provides data security during operator access.
  • Self-diagnostics
        Fast and accurate self-diagnostics can be done for multi-channel loadcells
  • Enclosure
        Field Mount
        Outline dimensions: 296mm x 399mm x 132mm
        Mounting hole dimensions: 280mm x 247mm
        Panel mount:
        Outline dimensions: 299mm x 154mm x 203mm
        Opening dimensions: 142mm x 287mm
  • Temperature
        Operating: -10-50¡æ
        Storage: -40-70¡æ
  • Power Requirements
        110-120 - 220-240VAC, 50Hz
  • Digital Inputs/Outputs
        Three (3) programmable digital inputs allow the controller to accept switching value inputs and/or
         instructions from various equipments.
        Four (4) programmable digital outputs (relay,voltage free contacts) allow the integrator to provide
         various data indication and/or activate ancillary equipments.
  • Speed Input
        Single (1) speed pulse input from speed sensor.
  • Analog Inputs/Outputs
        Input: Millivolt weight signals from toad cell(s)
        Outputs: One (1) standard current output 0-20mA or 4-20mA for flowrate signal
  • Control
        PID regulated control output
  • Communications
        RS232 or RS485 communication interface, PROFIBUS field bus (For additional inputs/outputs gapctose or
         other communication interfaces please contact Saimo)
 
© 2005-2009 Saimo Technlogy Pty Ltd. All Rights Reserved     
 
  • Checkweigher
  • Multihead Weighers
  • Combination Weighers
  • Linear Weighers
  • Packaging Machines
  • VFFS Machines
  • Process Weighers
  • Bulk Bag Weighers
  • Pillow Pack Baggers
  • Gross Weighers
  • Net Weighers
  • Bulk Handling Equipment
  • Weighing Equipment Form Fill and Seal Machines
  • Food Packaging Equipment